go to crlaurence.com to search for
Phone: (800) 421-6144 Fax: (800) 262-3299 TOLL FREE
GG182
From Anywhere in the U.S. or Canada
partition-posts
Search
CRL PARTITION POSTS
go to: crlaurence.com
/partition-posts
or enter the Catalog Number for complete product information
Assemble the Aluminum Partition Posts You Need in Your Own Shop and Save Time With a Very Minimal Parts Inventory You Will Always Be Ready to Provide Your Customers With the Partitions They Want Without Delay
135 Degree Center Post Base Configuration Shown
CRL Square Post Extrusion CRL U-Channel
With CRL's 135 Degree H-Bar you're not restricted to rectangular Partition Post layouts. Use D634 in place of D631 Glass Channel to create 135 Degree Posts in either End or Center configurations. Fasten D637M Square Bar Stock to D630 Square Extrusion with D134 Screws, then fit D634 over D637M to make a 135 degree glass angle. D634 comes in four finishes to match our Square Extrusion and Glass Channel.
D634A 135 Degree H-Bar D637M Square Bar Stock .250" (6 mm) .250" (6 mm)
D690 Cap D990 Standard Post D630 Extrusion D631 Channel D695 Base D150 Screws D150 Screws D630 Extrusion D631 Channel D991 Air Space Post D690 Cap D697 Saddle D175 Screw D175 Screw D695 Base D992 Extra Tall Post D630 Extrusion D631 Channel D690 Cap D175 Screw D150 Screws D693 Base D134 Screws D664 Brace
.381" (10 mm) .312" (8 mm) .290" (7 mm)
"Make Your Own" Design Series Partition Posts With CRL Components
135 Degrees .308" (7.8 mm) .467" (11.9 mm) .388" (9.9 mm)
Make 135 Degree Posts for Special Installations
1.126" (28.6 mm) NOTE: If using 3/8" (10 mm) thick glass, D321 or D604 U-Channel must be used. View them at crlaurence.com for exact inside Channel dimensions that will be appropriate for your glass thickness. D321 and D604 U-Channels will require that you wet glaze the glass.
U-Channel is available in the same four finishes as our D630 Square Extrusion. The .308" (7.8 mm) channel width allows for vinyl packing around glass of 3/16", 7/32", and 1/4" (5 to 6 mm) thickness. Fasten to Square Extrusion with pop rivets or Cat. No. D175 Screws. Available in 12 foot (3.66 m) stock lengths you cut to required size. Partition Post Stock is 1.126" (28.6 mm) square extruded aluminum in your choice of four beautiful finishes: Satin Anodized, Duranodic Bronze, Brite Anodized, and Brite Gold Anodized. 12 foot (3.66 m) stock lengths are ready to be cut into any length posts required.
CAT. NO. FINISH
D630A D630DU D630BA D630BGA Satin Anodized Duranodic Bronze Brite Anodized Brite Gold Anodized
Minimum order: 1 stock length. All CRL Aluminum Extrusions can be combined for quantity pricing. Packing charge added to orders of less than 10 combined lengths. F.O.B. CRL service centers. Specify cutting instructions if stock lengths are to be shipped via U.P.S.
CAT. NO. FINISH
D631A D631DU D631BA D631BGA Satin Anodized Duranodic Bronze Brite Anodized Brite Gold Anodized
Minimum order: 1 stock length. All CRL Aluminum Extrusions can be combined for quantity pricing. Packing charge added to orders of less than 10 combined lengths. F.O.B. CRL service centers. Specify cutting instructions if stock lengths are to be shipped via U.P.S.
CAT. NO. DESCRIPTION FINISH
D634A D634DU D634BA D634BGA D637M 135 Degree H-Bar Bar Stock Satin Anodized Duranodic Bronze Brite Anodized Brite Gold Anodized Mill
Minimum order: 1 stock length. All CRL Aluminum Extrusions can be combined for quantity pricing. Packing charge added to orders of less than 10 combined lengths. F.O.B. CRL service centers. Specify cutting instructions if stock lengths are to be shipped via U.P.S.
MORE
INFORMATION
crlaurence.com
1.126" (28.6 mm)
Previous Page