CRL BOTTOM ROLLING DOOR SYSTEMS
go to crlaurence.com to search for
Phone: (800) 421-6144 Fax: (800) 262-3299 TOLL FREE
428Z
From Anywhere in the U.S. or Canada
sliding-glass-doors
Search
or enter the Catalog Number for complete product information
MORE
CHOICES
crlaurence.com/sliding-glass-doors
CRL SDR and SSR System Accessories
CRL SSR Top Track With Glazing Pocket is available in stock lengths that you can cut to size in the field if conditions require mounting the SSR Top Tracks prior to ordering the entire system. Roll-In Glazing Vinyl for 1/2" (12 mm) glass is included. Choice of seven architectural finishes. Snap-In Filler Strip for the Sliding Door Pocket of the Top Track gives your project that finished look. It is available in seven architectural finishes. This clear Polycarbonate Seal closes the gap between the two sliding panels in our SDR and SSR Series Sliding Door Systems. Fits glass up to 1/2" (12 mm) thick, and can be permanently adhered using our Cat. No. AT0401436 Double- Sided Very High Bond Tape. Simply apply tape to leading edge of glass on inside panel, then snap Polycarbonate in place. Snap-In Filler Strip for the Glass Pocket of the Top Track conceals the unused glass pocket. It is available in seven architectural finishes to give your project a finished look.
Comes With Roll-In Glazing Vinyl for 1/2" (12 mm) Tempered Glass Snaps Into the Unused Sliding Door Pocket of Our SD1TT and SSR1TT Series Top Track Simple Snap-On Installation for 1/2" (12 mm) Glass Snaps Into the Unused Glass Pocket of Our SSR1TT Series Top Track
SSR Top Track With Glazing Pocket Snap-In Filler Strip for Sliding Door Pocket Sliding Door Seal Polycarbonate Snap-In Filler Strip for Glass Pocket
Closes Gaps Up to 1-13/16" (46 mm) Wide Inside Panel
4-5/8" (117 mm) Clad 1-3/4" (45 mm) Non-Clad 4-1/2" (114 mm) Non-Clad 2-1/4" (57 mm) Non-Clad 2-5/16" (59 mm) Clad 1-13/16" (46 mm) Clad
CAT. NO. FINISH LENGTH
SSR1TTSA SSR1TTDU SSR1TTBL SSR1TTBS SSR1TTPS SSR1TTPB SSR1TTSB Satin Anodized Black Bronze Anodized Black Powder Coat *Brushed Stainless *Polished Stainless *Polished Brass *Satin Brass 120" (3.05 m)
Minimum order: 1 each. Finishes can be combined for quantity pricing. *Clad finish. Must ship common carrier. Stock lengths cannot be cut to ship via U.P.S. NOTE : CRL recommends that Clad Finishes be cut using only a CRL Cat. No. BNDSW1 Band Saw or a Cat. No. LC1230 Cold Saw with A91039 Carbide Blade. Use of a standard Chop Saw or Abrasive Blade will cause the cladding to heat up and damage the finish
CAT. NO. FINISH LENGTH
SDTTF1SA SDTTF1DU SDTTF1BL SDTTF1BS SDTTF1PS SDTTF1PB SDTTF1SB Satin Anodized Black Bronze Anodized Black Powder Coat *Brushed Stainless *Polished Stainless *Polished Brass *Satin Brass 120" (3.05 m)
Minimum order: 1 each. Finishes can be combined for quantity pricing. *Clad finish. Must ship common carrier. Stock lengths cannot be cut to ship via U.P.S. NOTE : CRL recommends that Clad Finishes be cut using only a CRL Cat. No. BNDSW1 Band Saw or a Cat. No. LC1230 Cold Saw with A91039 Carbide Blade. Use of a standard Chop Saw or Abrasive Blade will cause the cladding to heat up and damage the finish
CAT. NO. FINISH LENGTH
NHF12SA NHF12DU NHF12BL NHF12BS NHF12PS NHF12PB NHF12SB Satin Anodized Black Bronze Anodized Black Powder Coat *Brushed Stainless *Polished Stainless *Polished Brass *Satin Brass 120" (3.05 m)
Minimum order: 1 each. Finishes can be combined for quantity pricing. *Clad finish. Must ship common carrier. Stock lengths cannot be cut to ship via U.P.S. NOTE : CRL recommends that Clad Finishes be cut using only a CRL Cat. No. BNDSW1 Band Saw or a Cat. No. LC1230 Cold Saw with A91039 Carbide Blade. Use of a standard Chop Saw or Abrasive Blade will cause the cladding to heat up and damage the finish
CAT. NO. LENGTH
SDGC98 98" (2.5 m)
Minimum order: 1 each. Stock lengths are individually packed to protect them during shipping.
USE TEMPERED GLASS
Optional Pull Hardware
CRL Thru-Glass Pull Cat. No. FP214BS CRL SGH8 Series Frameless Sliding Door Handle CRL Thru-Glass Pull Cat. No. 1819BS and 1819PS (See Page 368Z)
Previous Page