USE TEMPERED GLASS
go to crlaurence.com to search for
Phone: (800) 421-6144 Fax: (800) 262-3299 TOLL FREE
258Z
From Anywhere in the U.S. or Canada
access-handles
Search
or enter the Catalog Number for complete product information
Contact CRL Technical Sales at (800) 421-6144 in the U.S., (877) 421-6144 from Canada, or (323) 588-1281 International. You can also send e-mail to architectural@crlaurence.com . NOTE: All Access Control Handles on this page function as health and safety tools, and may only be purchased through CRL Authorized Glass Temperers and Door Manufacturers.
Specifically Designed for 1/2", 5/8" or 3/4" (12, 16 or 19 mm) Tempered Glass Balanced Doors (See Pages 458Z-464Z) UL, ULC, and ANSI/BHMA Certified* Custom Finishes Available on Special Order Available in 304 Grade Polished and Brushed Stainless, 385 Grade Satin and Polished Brass, and Oil Rubbed Bronze Custom Sizes Ship Within One to Two Weeks
requirements for Balanced Doors, while maintaining an excellent appearance. The building code states that the push pad shall not extend more than one-half the width of the door measured from the latch side, and this creates an undesirable appearance. Our BP100 Series has a fixed handle portion that extends toward the hinge side of the door, with a clearly defined push pad handle portion at the latch side of the door. This wider handle has greatly improved aesthetics over a handle that only spans one-half of the door's width. requirements, while at the same time delivering the beautiful hardware that our architectural customers demand. *ANSI/BHMA Certification does not apply to Oil Rubbed Bronze finish.
60" (1524 mm) Maximum with 1/2" or 5/8" (12 or 16 mm) Glass 66" (1676 mm) Maximum with 3/4" (19 mm) Glass 10-1/2" (267 mm) 34" to 48" (864 to 1219 mm) Consult Local Building Codes 4-1/8" (105 mm) 8" (203 mm) Center line of Door
CRL Blumcraft BP100 Series Panic Handles for Balanced Doors
Handle A-BP Handle D-BP Handle B-BP
Top Latching
CRL Balanced Door Panic Handle Size Limitations
Center of Keyed Access
UL is a registered trademark of UL LLC.
MAXIMUM DOOR HEIGHTS
Exterior - 96" (2.44 m) for 1/2" or 5/8" (12 or 16 mm) Glass Thickness - 102" (2.59 m) for 3/4" (19 mm) Glass Thickness Interior - 102" (2.59 m) for 1/2" or 5/8" (12 or 16 mm) Glass Thickness - 108" (2.74 m) for 3/4" (19 mm) Glass Thickness Exception - When using "F" Style Exterior Handle - 108" (2.74 m) for either 1/2", 5/8" or 3/4"(12, 16 or 19 mm) Glass Thickness
Exterior Handle Combinations for Balanced Doors With CRL Blumcraft Panic Handles
Centerline of Door
CRL BLUMCRAFT ACCESS CONTROL HANDLES
MORE
CHOICES
crlaurence.com/access-handles
NOTE: Exterior Fixed Handles shown above can be used in combination with our BP100 Series Panic Handle. For additional Exterior Fixed Handle options, see page 255Z.
Previous Page